How to define Targeted Pages (Where section)

The Where section is part of the targeting step, along with the choice of the Visitor Segment (Who section), the Triggering conditions (How section) and the Frequency conditions (When section).

📖 How it works

Configuring the targeted pages of your website means specifying the page(s) for which the changes made via the visual editor/ code editor will be seen by your visitors. This configuration is made inside the targeting interface, on the same page as the segment configuration, in the “where” section.

The targeted pages set-up applies differently regarding the type of campaign:

• AB Tests: it applies to your whole AB Test, meaning the original variation (V0) and all the variations (V1, V2, and V3 for an A/B/C/D test, for example) for a test

• Multipages tests and Multipages patches: it applies to the selected sub-test. Use the dropdown to navigate between sub-tests and choose the right pages for each of them

• Personalizations: it applies to the selected scenario for the personalization campaigns. Use the dropdown to navigate between scenarios and choose the right pages for each of them

• Patches: only one scenario and a 100% allocation traffic, no specific rule

• AA Tests: only one scenario and a 100% allocation traffic, no specific rule

Single-page Experiences vs. Multipage Experiences

• For A/B Tests, Simple Personalizations, and Patches, you’ll have to define one single targeted page rule for your campaign because these types of campaigns have only one “experience” (one type of new content generated with AB Tasty to display).

• For Multipage Tests, Multivariate Tests, Multipage Personalizations, and Multi-experience Personalizations, you’ll have to define a targeted pages rule for each “experience” or "sub-test". This rule can be the same or different depending on your needs.

Best practices

• Use different targeted pages for Multipage Tests and Multipage Personalizations. This is the objective of these kinds of campaigns: displaying several different messages (the experiences, to create a relevant and complete user journey) on several different targeted pages.\

• Use the same targeted pages for Multivariate tests if you’re testing a combination of several changes on the same page and try to discover the better combination (color of the CTA, small style banner, new product carousel on a product page)\

• Use the same targeted pages for Multiexperience Personalizations: this kind of campaign has been designed to help you to launch several messages to different segments in the same campaign and to assure no overlap between messages. To learn more about them, please refer to this article

We also offer a “Replicate” option, which allows you to replicate the full targeting setup or one part of the targeting setup of one experience in another experience, or in all experiences.

For more information refer to this Replicate targeting section and the article dedicated to Replicate targeting option.

⚙️ Configuration of the targeted pages

To target your campaign, you can either:

• use a saved Page,

• configure URL(s) using the URL operators,

• target all pages,

• targeting on an event,

• use the target by ID/Class/Element option,

• use the target by code option,

Let's have a closer look on the interface and its possibilities.

When you land on the page, you’ll find the following set-up:

• The operator "is" selected by default\

• The URL you’ve used in Step 1 Main Information page to load the Visual Editor which is pre-pasted in the URL field

• Additional options:

  • Add condition

  • CSS selector option

  • Code option

  • target by event option checkbox

Using operators to target the right URL(s)

The dropdown will present you with several options, in this order:

• Inclusive operators: is, is exactly, contains, is regular expression, and is saved page

• Exclusive operators: is not, is not exactly, does not contain, is not regular expression, and is not saved page

• Target All URLs: it will target your campaign on all your website pages where the AB Tasty generic tag has been installed.

Caution: If you have several sub-domains for all of the languages or countries you’re addressing, your campaign will be displayed on all of them. Use this option with caution, if you are sure that your campaign should be targeted on 100% of the pages of your domain. For more information about the way you've set-up your account regarding domains, please refer to this article.

Details about inclusive and exclusive operators

This is the matrix about the way the operators work:

To learn how to manipulate operators to build the correct pages targeting, please refer to this complete article.

Using saved pages

From the dropdown, you can access the list of the saved pages you’ve previously set up in the page builder. For that, you just have to select the following operator:

• Is saved Page

• Is not saved Page You can access the page builder by clicking on “Manage Saved Pages”.

Please refer to this article for more information.

You can directly click on the saved page you want to include/exclude by using the dedicated “is saved page” option in the previous dropdown.

You can mix the inclusion of saved pages with the exclusion of saved pages by clicking on “Add Condition”.

You can also mix saved pages with custom URLs.

In any case, the functional rules between inclusions and exclusions are the same for the setup by URLs:

• Inclusion(s) only: If you include one or several specific URL(s) and saved pages, all the other URLs will automatically be excluded from the targeting. At least one of them has to match.

• Exclusion(s) only: If you exclude one or several specific URL(s) and saved pages, all the other URLs will automatically be included in your targeting configuration.

• Combination of inclusions and exclusions: You can combine inclusive rules with exclusive rules. In this case, to be accepted in the targeting, a website’s URL has to match:

  • All the exclusion rules

  • At least one of the inclusion rules

Using the CSS selector option

Use the CSS selector option if you want to display changes on the pages of your website containing an element linked to a specific ID or class, whose presence cannot be determined by a URL. It is useful for targeting a set of pages that don't share a specific URL structure.

You can choose between the ID of your element, the CSS class, or any other parameters (custom choice in the dropdown). If the element you want to declare exists on the page you’ve loaded in the editor, it will appear while beginning to fill in the field by auto-completion.

This option is compatible with other options in the section, except for the Target All URLs option.

The option "My element appears after page load" is useful if you element is loaded after the page load (dynamic element such as a popin for exanple).

Using code option

The code-based option enables you to insert JavaScript code to trigger a campaign depending on the presence of a specific JS instruction. This option is compatible with other options in the section, except for the Target All URLs option.

When using this option, you must comply with the following rules:

• Do not use a function (){ at the beginning of your code.

• The function/condition you code must return a true or false value.

• If you plan to use jQuery, you must enable the use of jQuery in Settings. In this case, go to Account Management → Framework and select Load AB Tasty’s jQuery.

For more information on this option, refer to Using the code-based option.

Specific Option: Triggering your whole campaign with an event

In some instances, you might want to launch a test after a user completes a certain action on your site, for example, after they have clicked a certain button, or after they have spent a certain length of time on a given page. You can condition a test in this way using the JavaScript function ABTastyStartTest. This function takes a single, unique parameter: the ID of the test you would like to launch. It must be called after the AB Tasty tag. The function takes the following form:

ABTastyStartTest(testID); // 

Where testID is the ID of the campaign to be launched.

This function must be called as soon as each visitor has completed the action on which the test is performed. Note: the tested page must be the page on which the action takes place (you cannot test modifications on another page). To create a test conditioned on an event, you must:

• Create a standard campaign, applying your desired modifications

• Click on "More options". Target by Event option appears.

• Toggle on “Target by Event”. Note that other targeting options will no longer be available

• Set up the rest of your campaign as usual

• Launch your campaign

• Call the function ABTastyStartTest directly from your application whenever the event occurs.

• For example, if you would like test 12345 (set up in advance) to be triggered by a click on a button, you can do this in the following way:

<button onclick='ABTastyStartTest(12345)'>Launch a test from this button</button>

You can use any other method which links this function to an event. For example, you could use jQuery, or a callback function might be used if your site uses AJAX.

💡 Use cases

Targeting a set of pages

To target a set of the same types of pages (all product pages or category pages of your website, for instance), you can choose from the two configurations below:

Targeting all pages

To target all the pages of your website, use one of the two configurations below:

Or Select the Target all pages option.

Need additional information?

Submit your request at [email protected]

Always happy to help!